ACL Anatomic Knee Brace With Orthopaedic Stays
Description
ACL ANATOMIC KNEE BRACE WITH ORTHOPAEDIC STAYS
Product description
Knee brace AS-SKL/F belongs to the 4SPORT group. It consists of lateral stays, which protect the knee joint, VELCRO tapes and ACL support. The brace is made of innovative, compression and skin-friendly fabrics called ActivPren™ and ActivSpace™.
ActivPren™ is an active 3-layered fabric made of elastic jersey layer and perforated neoprene foam. This lamination is very soft and high elastic. Foam’s perforation improves the air circulation and maintains great skin’s condition. The skin can breathe freely and its required temperature is maintained because of AirSupply System. This material is not knitte, what prevents skin against the skin abrasions in the compression zones. Our braces, made of ActivePren are the most durable and provide the best stabilization in the market. WATERPROOF MATERIAL.
ActivSpace™ is a spacer, polyamide 3D lamination with high skin ventilation. It is very lightweight, consisted of 2 layers. Between them, we use polyamide braids with 4 mm width. ActivSpace™ is not elastic what improves stabilization. Inside the lamination, between 2 layers, the air flows freely, maintaining minimal water and moisture absorption. Waterproof material.
The brace, thanks to its orthopaedic stays, stabilizes the knee joint. Furthermore, it supports the muscles insertions and has analgesic properties by stable compression. The design of the fabric enables use of the support even in extreme conditions e.g. sport activities.
Purpose of use
AS-SKL/F brace should be applied in cases of:
- stressed knee joint,
- knee twist and sprain,
- knee dislocation,
- little side instability of the knee joint.
Available sizes
| Size | Knee circumference | How to measure |
| S | 30-34 cm (11,8″-13,4″) |
 |
| M | 34,5-38 cm (13,6″-15″) |
|
| L | 38,5-42 cm (15,2″-16,5″) |
|
| XL | 42,5-46 cm (16,7″-18,1″) |
|
| XXL | 46,5-50 cm (18,3″-19,7″) |
Total length of the product: 31 cm (12,2″)
SPIRAL BONING
Our orthopedic spiral boning is a thin wire, coiled into a spring and flattened. We use boning of various widths and wire thicknesses, which determines the strength of their stabilization. Each spiral boning has two specially profiled fittings to prevent damage of the orthosis. They are galvanically protected against corrosion by the galvanizing process, so they are resistant to water, moisture and sweat. Products equipped with bonings can be washed without removing them from the orthosis. They work in every direction, perfectly adjusting to the user's body and have a shape memory function, thanks to which they always return to their original profile. This function causes the spiral boning in the orthosis to stabilize the swollen limb immediately after the injury and after the swelling has come off.
