BATH RING BODYMAP® S SWIMMER
The bath ring BodyMap® S Swimmer is an excellent solution for the youngest. The bath ring supports the head, keeping it above the water line and preventing it from immersion. It helps the child do all the water rehabilitation exercise and care treatments without the risk of choking or drowning.
Special trunk straps, supplied as a standard equipment, are fastened to the cushion and keep the patient in the safe position. The patient can move the limbs and trunk freely while using the cushion which allows them to do water exercise under load.
The bath ring BodyMap® S Swimmer is a safe and universal product. It maintains the patient’s body in a vertical or horizontal position and prevents the body rotation. The anatomic shape of the cushion provides the highest comfort of use.
BodyMap® S Swimmer is laminated with a self-adhesive fabric which makes it possible to attach various elements with the use of Velcro to it. Thanks to that function, it is easy to stabilize the patient.
NOTE!
Each BodyMap® product can be custom-made.
INDICATIONS
- Bedsore prophylaxis in the neck area, especially at C7 height
- Neurogenic diseases with increased or weakened neck muscles tension
- Torticollis
- As a stabilization after surgeries performer in the cervical spine
KEY FAETURES
- Shaped form lasts for a long time
- Easy to give a demanded shape
- Self-adhesive function
- Waterproof
BodyMap® products are made of soft, elastic neoprene foam, which perfectly adapts to the patient’s body. With such precise mapping the contact area of the body with the cushion surface is increased, thereby the pressure is reduced. This has a very significant impact in the prevention of bedsores. Thanks to the vacuum technology, it is possible to gradually adjust the level of hardness of the product.
With dual-function pump it is possible to adjust the hardness of the cushion to the individual needs of the patient. They allow precise pumping out of the air in order to achieve the desired hardness. Electric and manual pumps are available.
INCLUDED
Self-adhesive function
The cushion is covered with a self-adhesive fabric at the bottom. As a result, various elements can be attached to it with the use of Velcro. This allows you to stabilize the patient in the cushion while exercising in the water.
Vacuum pump
Handy, small vacuum pump, ideal for small and medium-sized cushions.
Repair kit
A repair kit is added to each cushion, which consists of a tube of neoprene glue, a set of patches and an instruction manual.
Valve with chain
The pump valve is small and easy to lose. With the chain you will never have to search for it again.
SUGGESTED ACCESSORIES
Service valve
Granules
Electric pump
Manual dual-function pump
Electric dual-function pump
AVAILABLE SIZES
A1 – Headrest width – top, A2 – Headrest width – bottom, B – Headrest depth, T – Headrest thickness
| Size | Dimensions [cm] | ||||
|---|---|---|---|---|---|
| A1 | A2 | B | T | Thickness of neoprene | |
| 1 | 40 | 6 | 40 | 6 | 5 mm |
The measurements have been made after the air was pumped out and the cushion was initially shaped. The tolerance of the dimensions in the size table is +/- 2 cm. The dimensions of the product may slightly differ depending on the way it is shaped.
SEE OUR BodyMap® VACUUM SYSTEM MOVIES!