UPPER LIMB SUPPORT FOR WHEELCHAIRS, STROLLERS AND STANDING FRAMES BODYMAP® E
BodyMap® E is a special upper limb support for wheelchairs, positioning chairs and standing frames which can be easily shaped to the patient’s arm. It can be mounted on most of the wheelchairs, positioning chairs as well as standing frames. The shape of the arm support can be easily changed if necessary.
One side of the BodyMap® E arm support is laminated with high quality elastic polyester whereas the second one is laminated with a self-adhesive fabric which makes it possible to attach various elements with the use of Velcro to it. Thanks to that function, stabilizing the patient’s arm or mounting the support in any place, e.g. in a stroller or chair, is now possible. Additionally, the self-adhesive function prevents the arm support from moving.
If the product is placed on a hospital bed, it is necessary to use a special bed sheet with a self-adhesive function produced by REH4MAT®.
NOTE!
Each BodyMap® product can be custom-made.
INDICATIONS
- Cerebral palsy
- Hemiplegia (tetraplegia)
- Bedsore prophylaxis
KEY FEATURES
- Shaped form lasts for a long time
- Easy to give a demanded shape for better rehabilitation
- Possibility of mounting the headrest in a wheelchair, positioning chair, special needs stroller
- Optional cover made of VISmemo™ thermoactive foam
- Self-adhesive function
- Waterproof
BodyMap® products are made of soft, elastic neoprene foam, which perfectly adapts to the patient’s body. With such precise mapping the contact area of the body with the cushion surface is increased, thereby the pressure is reduced. This has a very significant impact in the prevention of bedsores. Thanks to the vacuum technology, it is possible to gradually adjust the level of hardness of the product.
For patients, who use the BodyMap® cushion continuously for more than two hours, it is recommended to use the VISmemo™ thermoactive cover to minimize the risk bedsores.
For patients particularly susceptible to pressure sores, we recommend the use of BodyMap® cushions with a COTTON COVER , FLEXIBLE COVER or 3D Mesh™ COVER and Aerating-massaging pads.
With dual-function pump it is possible to adjust the hardness of the cushion to the individual needs of the patient. They allow precise pumping out of the air in order to achieve the desired hardness. Electric and manual pumps are available.
INCLUDED
Self-adhesive function
The armrest is covered with a self-adhesive fabric at the bottom. As a result, various elements can be attached to it with the use of Velcro. This allows you to stabilize the patient’s arm or mount the armrest in such places as a stroller or seat.
Vacuum pump
Handy, small vacuum pump, ideal for small and medium-sized cushions.
Repair kit
A repair kit is added to each cushion, which consists of a tube of neoprene glue, a set of patches and an instruction manual.
Valve with chain
The pump valve is small and easy to lose. With the chain you will never have to search for it again.
SUGGESTED ACCESSORIES
Service valve
Granules
Electric pump
Electric dual-function pump
VISmemo™ cover
Aerating-massaging pad
Cotton cover
Elastic cover
3D Mesh™ cover
Frame for BodyMap® system – Forearm suport
Non-elastic stabilizing belt
Stabilizing tape with clamps
AVAILABLE SIZES
| Size | Dimensions [cm] | Available colors | Suggested accessories – catalog number | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A1 | B | C | Cotton cover  |
VISmemo™ cover  |
Elastic cover  |
3D Mesh™ cover |
Aerating-massaging pad |
Thickness of neoprene | ||
| 1 | 20 | 22 | 32 | 13 |  |
PF/BM-E/1 | PV/BM-E/1 | PEL/BM-E/1 | P3D/BM-E/1 | PMN/BM-E/1 | 5 mm |
| 2 | 25 | 26 | 41 | 13 | |
PF/BM-E/2 | PV/BM-E/2 | PEL/BM-E/2 | P3D/BM-E/2 | PMN/BM-E/2 | 5 mm |
The measurements have been made after the air was pumped out and the cushion was initially shaped. The tolerance of the dimensions in the size table is +/- 2 cm. The dimensions of the product may slightly differ depending on the way it is shaped.
SEE OUR BodyMap® VACUUM SYSTEM MOVIES!